Magikitchn CG-60 Bedienungsanleitung PDF herunterladen (Seite 2)

L25-008 Rev  (0/)

CG - 60

OUTDOOR CHARCOAL GRILL

USE AND CARE INSTRUCTIONS

The CG outdoor charcoal grill is designed for simple and efficient transportation, set up,

and operation. After unpacking your unit, assemble the unit as follows:

ASSEMBLY

3. Unwrap and remove the four leg/caster assemblies (5). Lift off the frame assembly

and coal screens (optional) and set aside.

4. Turn the base upside down. To install the leg/caster assemblies insert each

leg/caster assembly (5) into a leg socket on the base and depress the “snap

button” on the leg. The leg will slide into the socket and will lock into the correct

location.

5. Flip base with the leg/caster assemblies over into the upright position. Place the

frame assembly onto the base with the ends of the frame overlapping the ends of

the base.

6. Place coal screen(s), (optional) inside the base .

7. Place the cooking grid (1) onto the grid supports (2). Adjust to the desired height

and push the locking pin (3) in the appropriate hole in the grid support.

OPERATION

Pile charcoal sufficiently high to provide a single layer when spread evenly and light.

Replace the cooking grid and adjust to the desired height by sliding the top grid on/off the

unit ( a second person is recommended if the top grid is full of product). The charcoal will

require from 15 to 20 minutes to heat evenly depending on the dryness of the charcoal

and weather conditions.

WARNING: NEVER ATTEMPT TO HANDLE UNIT UNLESS UNIT IS COMPLETELY

COOL. NEVER HOSE DOWN THE UNIT WHEN HOT, AS THIS MAY CAUSE

POSSIBLE DANGEROUS SPATTERING, WARPING IN THE METAL, AND MAY

BREAK THE WELDS.

1 2 3 4 5 6 7 8

Keine Kommentare

Magikitchn CG-60 Bedienungsanleitung Seite 2